YANGILIKLAR

  • The Making Process Of Carbon Fiber Plate

    Carbon fiber plate is the main application form of carbon fiber prepreg. It has been widely used in many structural parts and has a series of performance advantages, such as light weight, high strength, high temperature resistance, corrosion resistance, etc. This article introduces the production process of carbon fiber plate. Prepreg cutting: Firstly, the prepreg should be cut according to the length and width of the plate, and the thickness of the prepreg should be determined according to the thickness of the plate.Conventional plate thickness has 10mm, 5.0mm, 10.0mm and other different sizes, the greater the thickness of the plate, the more the number of laminated prepreg layers is needed, the general 2mm thickness of the plate, the need for…
    Read more
  • Nine Knowledge Points About Carbon Fiber

    People know a little bit about carbon fiber, a high-tech material used in cars, airplanes and sporting goods.There are still many places worth exploring about carbon fiber. Today, I listed nine common knowledge points for you. I hope you can get some harvest after reading them. 1.Carbon fiber, sometimes called graphite fiber, is a high-strength, lightweight material that can replace steel in electronic devices and industrial manufacturing. 2.Carbon fiber was first invented by Thomas Edison to act as a filament. 3.Producing carbon fiber by electric means is slow and is generally only used in mass production. 4.If a 390ft production line in a 42,000-square-foot facility could produce up to 25 tonnes of carbon fibre a year, it would be the…
    Read more
  • Knowledge Of Carbon Fiber Frame

    The advantages of carbon fiber frames (1)Light weight frame can be made of carbon fiber frame is the carbon fiber against the direction of stress layer upon layer to get the strength.The carbon fiber frame is very light because of its density and strong tensile strength.Carbon frame 1-1..2 kg weight. (2)Carbon fiber with good impact absorbability is used to make prosthetic legs for disabled people to exercise, or special springs are used in various fields.Make use of its excellent performance of absorbing impact, make a bicycle without shock shock.But the quality difference between each manufacturer is big, some are very hard, because this kind of car frame rides ability to know good or bad. (3)Carbon fiber can be manufactured in…
    Read more
  • Why Is Carbon Fiber So Expensive?

    As a new material, carbon fiber has the advantages of high strength, light weight, high temperature resistance, creep resistance, seismic resistance, strong designability and so on. It has been used in aerospace and military industry, automobile high-speed rail, sports entertainment, medical equipment and other fields. However, its expensive price makes many people shrink back.So why is carbon fibre so expensive? 1. High production cost: Carbon fiber is pre-oxidized, carbonized and graphitized by polyacrylonitrile, bituminous or viscose based fibers at high temperature. After spinning, it needs to go through many drafts (including boiling water roller draft and high-temperature steam draft) and drying and densification, which results in high energy consumption.And in the carbonization process, also need 24 hours uninterrupted open furnace,
    Read more
  • Performance Comparison Of Carbon Fiber And Glass Fiber

    Glass fiber is made by melting glass at a temperature of 1300~1600℃, then spinning and melting while carbon fiber is made by preoxidizing, carbonizing and graphitizing polyacrylonitrile fiber at a high temperature of 2000~3000℃. They are same as fiber material and widely used in industrial machinery, automobile manufacturing, sports goods and other fields, so which performance is better of these two? 1. Density: The density of glass fiber is about 2.5~2g/cmA3, which is lower than that of ordinary metal and almost the same as aluminum. The density of carbon fiber is only 1.6 ~ 2.0g/cmA3, almost as heavy as Borui fiber, very light. 2. Tensile strength: The tensile strength of glass fiber is 2000MPa, which is dozens of times higher…
    Read more
  • What Is The Purpose Of Carbon Fiber Board

    Carbon fiber board is a fiber material with very low density. Its composition is 95% carbon. This new type of carbon fiber material is widely used in many fields. In terms of performance, its conductivity is very good, and it is extremely resistant. High temperature, so this material is very popular at home and abroad. The use of carbon fiber board: The use of carbon fiber board: concrete beam bending, shear reinforcement, concrete floor, bridge slab reinforcement, concrete, brick wall, scissors wall reinforcement, bridge pier, pile and other column reinforcement, chimney, tunnel, pool, concrete pipe Wait for reinforcement. Carbon fiber is more and more used in the current manufacturing industry, because carbon fiber has many excellent properties. Traditional glass fiber…
    Read more
  • Characteristics And Application Fields Of Carbon Fiber Board

    Carbon fiber board is a unidirectional plate reinforced and reinforced by carbon fiber. Its forming process is to impregnate the carbon fiber with resin and then solidify in the mold and continuous pultrusion. It has good properties such as high tensile strength, corrosion resistance, shock resistance and impact resistance. It can fully exert the strength and elastic modulus of carbon fiber. It can eliminate the resin curing stage of carbon fiber unidirectional fabrics during construction, and the strength utilization efficiency is high. Easy construction. The characteristics of carbon fiber board: 1. High tensile strength, good corrosion resistance, shock resistance and impact resistance Carbon fiber board has excellent physical and mechanical properties, tensile strength is more than 6 times that of…
    Read more
  • Advantages Of Carbon Fiber Hockey Sticks

    Ice hockey is a common ice sport that originated in Canada in the 19th century. Carbon fiber composite materials also have a previous saying that compared with metal materials of the same quality, the strength of carbon fiber is equal to 12 times of the metal strength. Carbon fiber products refer to the use of carbon fiber prepreg as raw materials, through different processing methods, processed into materials that can meet the requirements of use. At that time, there were no specific rules for this kind of sport, and the number of participants was not limited. It was only necessary to wear an ice skate, hold a hockey stick, and hit the ball into the goal on the frozen lake.…
    Read more
  • How To Use Carbon Fiber Flippers

    How to properly use carbon fiber flippers: 1. Before putting on carbon fiber fins, beginners must make sure that their water strokes are completely correct, because wearing fins will mask the wrong actions. 2. The beginner's ability to control his whole body is relatively poor when swimming, and the self-feeling movements are already correct, but they are actually not in place. If the fins are worn at this time to amplify the strength and movements of the legs, the swimmer will swim fast. The swimmer may mistakenly think that his movements are correct, and devote a lot of energy to practice. After removing the fins, he retains the wrong stroke. 3. For example, the correct leg kick should be driven…
    Read more
  • What Are The Magic Of Carbon Fiber Barrel?

    The carbon fiber barrel is specially designed for Luger precision rifles, aiming to improve the design accuracy while reducing the weight of the rifle. The main body of the carbon fiber barrel is made of stainless steel, the outer contour of the barrel is thin, and the surface is covered with carbon fiber material by a special process, so as to reduce the weight. The well-processed carbon fiber barrel is 20-25% lighter than the ordinary material barrel, and the accuracy is equivalent. The carbon fiber barrel is pre-processed and can be mounted on a Luger precision rifle with the help of simple tools. The main body is made of 416R stainless steel material, and the carbon fiber part is made…
    Read more